研磨崗位職責匯編(2篇)

崗位職責是什么

研磨崗位是生產制造流程中的關鍵環節，主要負責通過精細的工藝處理，將原材料或半成品表面進行打磨和拋光，以達到預期的尺寸、形狀、光潔度和表面質量要求。

崗位職責要求

1. 熟練掌握研磨設備的操作，包括但不限于砂輪機、拋光機等，并能依據工件材質和工藝需求選擇合適的設備和工具。

2. 具備良好的工藝知識，了解各種研磨材料的特性和適用范圍，能根據工件特性制定合理的研磨方案。

3. 對精度有高度敏感，能精確控制研磨過程，確保產品尺寸和形狀的準確性。

4. 能夠嚴格遵守安全操作規程，預防生產事故的發生，確保工作環境的安全。

5. 有較強的觀察力和問題解決能力，遇到異常情況能迅速判斷并采取相應措施。

6. 具備一定的團隊協作精神，能與其他部門配合，共同完成生產任務。

崗位職責描述

研磨崗位的工作日常包括但不限于接收生產訂單，分析工件圖紙，設定和調整研磨參數，進行試樣研磨，評估結果并進行必要的調整。在研磨過程中，需要持續監控設備運行狀態和工件加工進度，確保質量和效率。此外，還需定期維護和保養設備，保證其良好運行。在遇到難以處理的工件或技術難題時，研磨工需與工程技術人員溝通，共同尋找解決方案。

有哪些內容

1. 設備操作與維護：熟練操作研磨設備，進行日常清潔和維護，確保設備的穩定運行。

2. 工藝執行：依據生產工藝文件，精確控制研磨速度、壓力等參數，保證產品質量符合標準。

3. 質量控制：通過目測、測量工具等手段，檢查研磨后工件的尺寸、形狀和表面質量，及時記錄和報告異常。

4. 安全生產：遵守安全操作規程，佩戴個人防護裝備，防止工傷事故的發生。

5. 技術改進：參與工藝優化和設備改進項目，提升研磨效率和產品質量。

6. 文件記錄：完整記錄研磨過程和結果，為生產管理和質量追溯提供數據支持。

7. 溝通協調：與上下游工序保持良好溝通，確保生產流程的順暢進行。

研磨崗位是一個集技術、操作和安全意識于一體的重要角色，需要不斷學習和實踐，以適應制造業日益提高的精度和效率要求。

研磨崗位職責范文

第1篇 研磨工崗位職責

研磨工藝工程師 西安奇芯光電 西安奇芯光電科技有限公司,奇芯光電,西安奇芯光電,奇芯 工藝、 研磨、plc 芯片開發 夾具

1.overall purpose of job / 崗位目標

1.1 being responsible for process development, optimization and finalization of plc chips;

1.1 研磨工藝工程師負責plc芯片的工藝開發、優化及定型;

1.2 being responsible for researching the vendors of consumable and developing the polishing fi_tures;

1.2 負責研磨耗材供應商開發,研磨夾具的設計;

1.3 being responsible for formulating spc and sop, training and evaluating the operators.

1.3 負責spc,sop訂立,作業員培訓及考核。

2.major responsibilies主要職責

2.1 according to the polishing equipment and ability of out sourcing supplier, coordinate with out sourcing supplier on polishing process development and verification;

2.1 根據外協單位的研磨設備及能力,協同外協單位進行研磨工裝夾具的設計及驗證;

2.2 organizing the out sourcing supplier conduct the polishing process developing and verifying based on our own development requirement;

2.2 組織外協單位根據自身要求進行研磨工藝的開發及驗證;

2.3 being responsibility for standardising of polishing process.

2.3 負責研磨工藝的標準化;

2.4 being responsibility for developing the polishing process of new products;

2.4 負責新產品的研磨工藝開發;

2.5 being responsibility for increasing the

2.5 負責研磨工藝良率及效率的提升;

2.6 according to the requirement of end face, coordinating concerned person to consummate the dicing process.

2.6 根據研磨端面要求,協同芯片切割相關人員完善切割工藝;

3. key competencies/ 資格能力要求

3.1 must be proficient in polishing process, especially in polishing accuracy control;

3.1 精通研磨工藝,特別是研磨精度控制;

3.2 must have highly problem-solving ability;

3.2 分析解決問題能力強;

3.3 must be familiar with cad, 3d mapping software, all kinds of office software and data analysis software;

3.3 熟練cad、3d繪圖軟件及辦公軟件和數據分析軟件;

3.4 relevant working e_perience in dicing is better.

3.4 有芯片切割經驗更佳。

第2篇 研磨技術員崗位職責

研磨技術員 巴斯夫上海涂料有限公司 巴斯夫上海涂料有限公司,巴斯夫 職責描述:

? strictly obey the rules or regulations 、labor discipline and ehs requirements of the company;

嚴格遵守公司各項規章制度、勞動紀律和ehs制度的要求;

? work with operators on field, to make sure production process of milling lines smoothly follow pos and sops , treat any alarm occurred on the milling lines , to ensure milling lines run safely;

通過與現場操作工的協同工作, 確保研磨線生產流程按照訂單工藝指令和作業指導書順利運行,處理報警信息,確保生產過程安全運行;

? train and direct operators on duty to operate the equipment of milling lines properly;

培訓和指導當班操作工正確操作研磨線諸設備;

? clean and check the equipment or tools before and after using of them, report maintenance requirement if any defect or abnormity found, to make sure production high efficiency;

設備和工具使用前后進行清潔與點檢,發現故障或異常,及時報告,以確保高效的生產;

? according to the 5s requirement, make sure the working area clean and tidy all the time;

按照區域5s要求,確保工作區域整潔;

? to receive and transfer the production information from last shift and to ne_t shift;

交接班,使用領班交班本形式,接收傳遞上下班次信息;

? according to the e_perience accumulated from daily operation, actively put forward rationalization proposals to management team;

依據日常工作中自身積累的操作經驗,主動向管理人員提出合理化建議;

? actively discover and report potential safety hazard in production field by filling out safety report card.

積極發現和報告工作場所的安全隱患,并填寫安全報告卡。

? attend and pass the e_ternal and internal train organized by company

參加并通過公司組織的本崗位相關的外部取證和內部崗位培訓

? ehs responsibilities: see attached job ehs responsibility description

安環保職責:參見崗位安環保責任書

任職要求:

? education: 全日制大專及以上,本科優先

? working e_perience: 3年化工操作相關工作經驗,能適應倒班工作

? technical & professional knowledge: 能識別pid圖和有dcs/plc操作經驗者優先